Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's subtle, doesn't have key fobs or LED indicators and is hidden within the wiring of the vehicle.
It also allows the user to disable the system temporarily through Transport Mode to use it when they are renting out their vehicle. This guide will walk you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system connects directly to your car's ECU and is secured by a unique PIN code that you can choose. It is inaccessible to thieves using scanners for diagnostics or other modern methods, and it is unable to be disabled by circuit cuts.
The system is simple to use, however it is essential to have a professional installation to ensure a secure and secure connection to your vehicle's ECU. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement your vehicle's security package.
First, the installer must disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. Once the battery is disconnected, the installer may safely begin working. Hand tools are essential for securing connections with precision and a multimeter can be used to check electrical values and ensure safety. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. The user's manual gives specific guidelines that are specific to the Ghost Immobiliser model you have.
It is crucial to select an area for grounding that is free of any paint or debris during installation. Installers should also make sure that the immobiliser's wires, CAN H and the CAN L are connected to the appropriate ECU ports. The wires can be plugged into or soldered based on the model. To ensure a stable and durable connection it is recommended you choose a top-quality plug.
After the installation is completed Once the installation is completed, the customer can enable the Transport Mode. This allows valet parking or mechanics to use the vehicle without having to know the pin code. The customer must press the icon for service on the dashboard five times within 2 seconds. After that the system will confirm with 5 signal indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent choice for anyone who frequently rents out their cars on platforms such as Turo. Immobilisers can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
If you are looking for a solution that will safeguard your vehicle from theft You can't go wrong with an autowatch ghost immobiliser. The device stops your car from running even if someone steals or copies your key. It's possible because of its advanced technology that stops the engine from starting until the correct PIN code has been entered.
The device connects to the vehicle's CAN bus network and allowing it to communicate with the ECU directly. It makes use of buttons already on the dashboard and the steering wheel to create a unique sequence that only you can identify and makes it impossible for anyone else to start your vehicle. This is the most secure security system that will safeguard your pride and joy and preserve its value should you decide to sell it in the future.
Installing an immobiliser from Ghost is simple, but you must follow the directions to avoid electrical issues and malfunctions of the system. You'll need to locate a power supply of 12V and a solid grounding on the chassis of your car. Then, you'll be able to begin connecting the wires to the immobiliser. Make use of high-quality connectors and soldering techniques for a solid connection. Insulate the connections using heat shrink tubing, insulation tape or other materials to avoid electrical short circuits.
Once the wires are connected, you can reconnect the battery and turn on the engine to test the immobiliser's function. When everything is functioning correctly you can place it in a safe location beneath the dash or anywhere else in the vehicle. Make sure to hide it properly to stop any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified This means it meets the highest standards of security and is a great deterrent to car thieves. It offers superior protection against key cloning, hacking, and relay attacks, and it isn't able to be disabled unless you know the code. The device is simple to use, and it can be set to the service valet setting to ensure that your vehicle will not be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to prevent vehicle theft. It is directly connected to the vehicle's CAN bus network and communicates with the ECU which makes it a virtually undetectable addition to your vehicle. Ghost Immobiliser doesn't interfere with your vehicle's factory settings, unlike other aftermarket systems which require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't transmit or receive radio frequency signals, but instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
Enter your disarm sequence (either two or one buttons) and then turn on the ignition of your car to activate Ghost Immobiliser. The indicator will flash two times to confirm that you have entered the correct code. Once you've verified this, you're able to start your vehicle and leave safely.
Once installed Once installed, the Ghost Immobiliser will secure your vehicle from hacking and key cloning while preserving the value of your pride and joy. If you ever need to surrender your vehicle to valet parking or for service The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll need a constant power source (12V) as well as a grounding point to complete the installation of the Ghost immobiliser. Be sure that they are well-insulated and safe to touch. It is also recommended to use cable ties to tie and secure the wires. This will reduce the risk of being tampered with by thieves. Be sure to double-check the location of these points to avoid making mistakes, and mark them with an adhesive or label. Examine every connection for signs that they are wearing out. Be sure to ensure that all connections are securely in place, and properly sealed. Don't forget to test your Ghost Immobiliser after the installation is completed. This will make sure that the unit functions properly, and that all connections are safe and well-insulated. Be sure to correct any problems immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that integrates seamlessly into your car's ECU to prevent the engine from starting without authorization. The innovative technology it uses protects your vehicle from hacking, key cloning, and other common tactics that thieves employ to steal vehicles. The Ghost works in conjunction with existing tracking and alarm systems to provide the best security for your vehicle. The Ghost's unparalleled features and secluded design make it a popular choice for car enthusiasts and security-conscious motorists alike.
It is important to follow the steps of installation to ensure a proper integration of Ghost Immobiliser. Refer to the wiring diagram of the vehicle to help you locate and connect the wires. Then, you'll need to determine the power source and grounding points. Once you've identified these you'll be required to mark them so that they're easy to identify during the installation process. It is also essential to use high-quality tools and materials. Basic hand tools can help in making connections that are precise, while a multimeter will check electrical values and ensure security. Cable ties and insulation tape will help keep all connections neat and tidy. Finally, immobiliser ghost will give specific guidelines specific to your Ghost model.
Before you begin installing it is essential to test the system by entering the PIN code, then starting the vehicle. This test will verify that the immobiliser works in the way it was intended, preventing unauthorized vehicle start-ups. It's recommended to perform this step regularly as part of your routine inspections of the vehicle to ensure the system is operating correctly.
After the installation has been completed, you can begin driving your car with confidence. The Ghost will help keep your car and its contents safe from would-be thieves, ensuring that nobody can escape with your car without the correct PIN. The Ghost can also be linked with a tracker approved by Thatcham to identify any attempts at tampering or theft and allow you to track your vehicle if it's stolen.
The Ghost is compatible with a range of vehicles, including those from most major manufacturers. If you are looking to secure your vehicle with this cutting-edge device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards in the installation of our products. This assures insurance companies, customers and law enforcement agencies that installations are done safely and in a correct manner.